7370A SAM™ Studio Subwoofer

7370A är utformad för att ge utomordentlig precision och anpassar sig efter ditt akustiska utrymme för att ge kontrollerad och ofärgad LF-återgivning.

Aktiva delningsfilter

Bass Management


SPL

113 dB

Frekvensomfång

19 Hz - 150 Hz (-6 dB)

Mått

H 625 x W 555 x D 496 mm, (vy i tum)

Rent och precist

7370A erbjuder högre SPL och mer utökat lågfrekvensdjup än våra mindre, smarta subwoofers. Kabinettet med designen Laminar Spiral Enclosure ger ren och precis prestanda med otroligt låg distorsion – även vid höga uppspelningsnivåer. 7370A är utformad för professionell lyssning inom musikproduktion, postproduktion och sändning och ger tillförlitlig prestanda i många år, även i de mest krävande miljöerna.

Lågfrekvenser som överförs perfekt

7370A har dessutom inbyggd bass-management och möjlighet till multikanalanslutning. Den kan konfigureras och kalibreras med vår programvara GLM. GLM analyserar akustiken i ditt rum och anpassar frekvens, nivå, fördröjning och delningsfas för perfekt integrering av subwoofer och monitorhögtalare. Det ger dig en fullt optimerad lyssningsupplevelse och mixar som överförs perfekt.

Genelec

7370A SAM™ Studio Subwoofer

Levereras med:

1 x subwoofer 7370A
1 x strömkabel 1,8 m
1 x RJ45-kabel 5 m
1 x användarmanual

Genelec

7370A SAM™ Studio Subwoofer

Färgval

Tekniska Specifikationer

SPL

113 dB

Förstärkareffekt

400 W Bass (Class D)

Frekvensomfång

19 Hz - 150 Hz ("-6 dB")

Noggrannhet Frekvensomfång

± 3 dB (19 Hz - 100 Hz)

Storlek på högtalarelement

305 mm Bass (vy i tum)

Mått

H 625 x W 555 x D 496 mm, (vy i tum)

Vikt

48 kg / 105.8 lb

Anslutningar

8 x XLR Analog Input

8 x XLR Analog Output

1 x XLR AES/EBU Input

1 x XLR AES/EBU Output

2 x RJ45 Control

1 x XLR Analog Input

1 x XLR Analog Output

Nyckelteknologier

Aktiva delningsfilter

Bass Management

Intelligent Signal Sensing (ISS™)

Tekniken Laminar Spiral Enclosure (LSE™)

Optimerade förstärkare

Skyddskretsar

Smart Active Monitor-system (SAM™)


Referenser

How GLM™ (Genelec Loudspeaker Manager) Software Works

Next Steps for Genelec SAM™ Systems


Hitta Din Återförsäljare

Ange din stad för att hitta din närmaste Genelec-återförsäljare

Dokumentation

FAQ

The Classic 8000 Series monitors have an analogue input. The 7200 Series SAM subwoofers have AES/EBU digital outputs only. However, other 7300 Series SAM subwoofers have analogue inputs and outputs and can be used also with analogue monitors.

Which SAM™ Products You Are Going to Mix With the Classic 8000 Series?
Mixing 8000 Series and SAM™ monitors is not recommended

We do not recommend mixing Classic 8000 Series monitors with SAM™ Monitors.
If the analogue input sensitivity of 8000 Series and SAM™ Series monitors are the same, Genelec SAM™ Monitors exhibit a slightly larger latency (< 5 ms) than 8000 Series monitors. Therefore Classic 8000 Series and SAM™ Series monitors should not be mixed in a stereo pair or multichannel setup.

It is alright to mix Classic 8000 Series with SAM™ Subwoofers

However, it is okay to mix the Classic 8000 Series monitors with SAM™ Subwoofers. Any Classic 8000 Series monitors can be used with SAM™ Subwoofers, in any stereo or multichannel setup.

Setting the room response calibration controls

Genelec monitors are calibrated flat in anechoic free field conditions. When the monitor is placed in a room close to walls or other boundaries, the low frequency output of the monitor increases. To achieve a flat low frequency response an adjustment of typically -4 dB on the bass tilt control is used. Genelec also provides a bass roll-off control to compensate for any remaining excessive LF energy around the low cut-off frequency.
Genelec GLM AutoCal can implement a more precise compensation after measuring the acoustic effects produced by the monitor’s installation location.

Differences in room reverberation time and listening distance can lead to changes being required in the treble region so treble tilt is fitted to most of the models in the Genelec range.

In three-way monitors and large main systems there are additional driver controls for the bass level, mid level and treble level which enable very fine adjustment of the frequency response so that the monitors can be placed in many different listening environments, whilst still achieving a consistent and neutral sound reproduction.

The best way to set the room response controls of a Genelec monitor is by taking an acoustical measurement at the listening location, using a measurement system for those products that offer local controls (DIP switches) on the monitor or subwoofer, or by using GLM AutoCal for the SAM™ (Smart Active Monitoring) products.

hello

Got Questions?


Search our support portal for articles on frequently asked questions:

You can also submit an enquiry to our customer support team here.