7382A

SAM™ Studio Subbas

Med frekvensgång ner till 15Hz och max SPL kapacitet överstigande 130dB, 7382A är vår mest kraftfulla subbas till dags dato.

Smart Active Monitor-system (SAM™)

Optimerade förstärkare


SPL

129 dB

Frekvensomfång

15 Hz - 100 Hz (-6 dB)

Mått

H 625 x W 1400 x D 558 mm, (vy i tum)

Kraft och flexibilitet

7382A kombinerar kraftfullt och klart ljud med flexibla funktioner för kalibrering och bass-management. Den är designad för användning i inspelningsstudior, vid mixning av filmljud, mastring, postproduktion, uppspelning av EDM och i förstklassiga hemmabiosystem. Med hög SPL, lägre gränsfrekvens och låg distorsion ger 7382A precis basåtergivning även vid de allra lägsta frekvenserna.

Verkligt optimerad lyssning

Som en del av familjen med smarta, aktiva monitorhögtalare integreras 7382A med programvaran GLM, via vilken den kan konfigureras, kalibreras och styras. GLM möjliggör styrning av bass-management, hjälper dig att placera subwoofern i ett komplext rum och gör det även möjligt för dig att skapa uppsättningar med flera Genelec-subwoofers där det krävs. Som en del av familjen med smarta, aktiva monitorhögtalare ger 7382A dig en fullt optimerad lyssningsupplevelse och mixar som överförs perfekt.

Genelec

7382A SAM™ Studio Subwoofer

Färgval
Levereras med:

1 x 7382A subwoofer
1 x individuellt kalibrerad RAM-SW förstärkarenhet
1 x strömkabel 1,8 m
1 x RJ45-kabel 5 m
1 x Speakon signal-kabel 10 m
1 x användarmanual

Genelec

7382A SAM™ Studio Subwoofer

Färgval

Tekniska Specifikationer

SPL

129 dB

Förstärkareffekt

2500 W Bass (Class D)

Frekvensomfång

15 Hz - 100 Hz ("-6 dB")

Storlek på högtalarelement

3 x 381 mm Bass (vy i tum)

Mått

H 625 x W 1400 x D 558 mm, (vy i tum)

Vikt

145 kg / 319.7 lb

Anslutningar

3 x XLR Analog Input

2 x XLR Analog Output

1 x XLR AES/EBU Input

1 x XLR AES/EBU Output

2 x RJ45 Control

Nyckelteknologier

Smart Active Monitor-system (SAM™)

Optimerade förstärkare

Intelligent Signal Sensing (ISS™)

Bass Management

Skyddskretsar

Aktiva delningsfilter


Referenser

Genelec UNIO Explained | How the ecosystem offers seamless in-room and personal headphone monitoring

Using GLM | Walkthrough

Using GLM | The foundations

Using GLM | Controlling GLM with MIDI

Using GLM | GRADE Room Acoustic Report

Using GLM | Calibration Group IDs

Using GLM | Accounts and product registration

Using GLM | The technical details


Hitta Din Återförsäljare

Ange din stad för att hitta din närmaste Genelec-återförsäljare

Filters
X Filters
All
Studio Monitorer
Ljudsystem för hemmet
AV Installation
Teknisk Support
Showroom
Experience Centre
SAM Certified
Smart IP Certified
Land

Dokumentation

FAQ

The Classic 8000 Series monitors have an analogue input. The 7200 Series SAM subwoofers have AES/EBU digital outputs only. However, other 7300 Series SAM subwoofers have analogue inputs and outputs and can be used also with analogue monitors.

Which SAM™ Products You Are Going to Mix With the Classic 8000 Series?
Mixing 8000 Series and SAM™ monitors is not recommended

We do not recommend mixing Classic 8000 Series monitors with SAM™ Monitors.
If the analogue input sensitivity of 8000 Series and SAM™ Series monitors are the same, Genelec SAM™ Monitors exhibit a slightly larger latency (< 5 ms) than 8000 Series monitors. Therefore Classic 8000 Series and SAM™ Series monitors should not be mixed in a stereo pair or multichannel setup.

It is alright to mix Classic 8000 Series with SAM™ Subwoofers

However, it is okay to mix the Classic 8000 Series monitors with SAM™ Subwoofers. Any Classic 8000 Series monitors can be used with SAM™ Subwoofers, in any stereo or multichannel setup.

Setting the room response calibration controls

Genelec monitors are calibrated flat in anechoic free field conditions. When the monitor is placed in a room close to walls or other boundaries, the low frequency output of the monitor increases. To achieve a flat low frequency response an adjustment of typically -4 dB on the bass tilt control is used. Genelec also provides a bass roll-off control to compensate for any remaining excessive LF energy around the low cut-off frequency.
Genelec GLM AutoCal can implement a more precise compensation after measuring the acoustic effects produced by the monitor’s installation location.

Differences in room reverberation time and listening distance can lead to changes being required in the treble region so treble tilt is fitted to most of the models in the Genelec range.

In three-way monitors and large main systems there are additional driver controls for the bass level, mid level and treble level which enable very fine adjustment of the frequency response so that the monitors can be placed in many different listening environments, whilst still achieving a consistent and neutral sound reproduction.

The best way to set the room response controls of a Genelec monitor is by taking an acoustical measurement at the listening location, using a measurement system for those products that offer local controls (DIP switches) on the monitor or subwoofer, or by using GLM AutoCal for the SAM™ (Smart Active Monitoring) products.

hello

Got Questions?


Search our support portal for articles on frequently asked questions:

You can also submit an enquiry to our customer support team here.