Genelec AD9200A 8-Channel Analog to Digital Converter
Access to the benefits of Genelec’s DSP and SE™ DSP monitoring systems is made easier than ever with the AD9200A Analog to Digital converter. The Genelec AD9200A allows using the 7200 Series DSP subwoofers with analog signal sources, bringing the full potential of Genelec’s DSP monitoring systems to all applications.
The Genelec AD9200A converter outputs AES3 format with 24 bit word length and 192 kHz sample rate, providing the same consistent high quality found on our 8200 DSP products. Eight-channel balanced analog input is delivered via a 25-pin DB25 connector wired to the Tascam/ProTools industry standard pinout. Digital output consists of four XLR connections, each carrying two channels of AES/EBU audio. The 19"/1U high chassis is delivered with a separate 12V power supply.
| Technical Specifications | ||
| Analog input |
8 channel balanced DB25 Tascam/ProTools pin out | |
|---|---|---|
| Input clip level | +21.5 dBu | |
| Digital audio format |
AES/EBU (AES3), 24 bits, 192 kHz |
|
| Dynamic range |
110 dB (lin) | |
| THD+N | 0.018%, +20 dBu input, 22 Hz - 20 kHz | |
| Frequency range | 4 Hz - 76 kHz, -3 dB relative to 1 kHz | |
| External power supply type |
FW74010/12, 12 VDC | |
| Mains voltage |
100 - 240 VAC, 50 - 60 Hz | |
| Power consumption | < 7 W | |
| Weight | 2 kg (4.4 lb) | |
| Dimensions | Height | 43 mm (1 11/16") |
| Width |
483 mm (19") | |
| Depth | 105 mm (4 1/8") | |
